Raven Skull
![Featured Image](/_next/image?url=%2F3dprinting%2Fimages%2Fraven-skull%2FIMG_1129.jpeg&w=1200&q=75)
![Gallery image](/3dprinting/images/raven-skull/IMG_1131.jpeg)
![Gallery image](/3dprinting/images/raven-skull/IMG_1133.jpeg)
![Gallery image](/3dprinting/images/raven-skull/IMG_1134.jpeg)
![Gallery image](/3dprinting/images/raven-skull/IMG_1136.jpeg)
![Gallery image](/3dprinting/images/raven-skull/IMG_1138.jpeg)
This is a model of a raven skull that I printed for a kid up the street who is fascinated with birds.
Model
I printed it with eSun Bone White PLA+ with 3 walls for strength and tree supports. The supports were a little tricky to remove but it worked and it looks fantastic. I printed it at 0.2mm layer height and it took about 1.5 hours.
The model is from Printables and was designed by Shadowcraft Designs.
Print Settings
Printer: | Bambu Labs X1 Carbon |
Slicer: | Bambu Studio |
Material: | |
Nozzle: | 0.4mm |
Resolution: | 0.2mm |
Walls | 3 |
Infill | 15% Grid |
Supports | No |
Comments
I can be found on Reddit more than anywhere else. Feel free to reach out to me there.
May 25, 2024 (2mo ago)