Palm Plant Pot
This is a great 4" pot for a small plant. It has a built-in water tray and a hole in the bottom for drainage.
3D Printing/Modeling, Woodworking, Coding and generally making stuff
Tags
AirPrint (1)ams (1)Bambu (2)Bambu Labs X1C (1)Bambu X1C (2)Bandsaw (1)Bell Button (1)Cover (1)Ender 6 (11)eSUN (1)Exit Button (1)Extruder (1)Filament (1)Flexi Creatures (3)Furniture (6)Gift (2)Halloween (2)Holder (1)HueForge (1)Klipper (1)Labels (1)macOS (3)Milwaukee (1)Models (16)Mods (1)Network (1)Octoprint (2)Outdoor (1)Outdoor Project (4)Overture (1)Packout (1)PETG (1)PiHole (1)PLA (1)Plant Pot (1)Planter (1)Post (1)Prints (16)Raspberry Pi (1)react (2)SSH (1)STL (16)Tronxy (1)Tronxy X5SA (7)Tronxy X5SA Pro (1)typescript (2)UDM (1)Unifi (2)Valentines (1)Voron (1)Voron2.4 (1)VSCode (1)Weatherproof (1)web (2)Woodworking (1)
#STL (16 posts)
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
Milwaukee Packout Labels
I have pulled together a few different resources for Milwaukee PACKOUT labels for different organizers.
Valentines Heart HueForge
My first attempt at printing a HueForge art piece. In this case, a three dimensional Valentines Heart
Small 'Metal' Drawers
Small drawers printed in metal silk filament
OMC/StepperOnline Stepper Motor Kit Data Sheets
Data sheets for OMC/StepperOnline VORON 2.4 Nema 17 Stepper Motor Kit 17HS19-2004S1
Sonos One Wall Mount
Wall mount for Sonos One speaker
Dinosaurs
Dinosaurs
Tronxy X5SA Pro Corner Pulley Covers
Corner pulley covers for Tronxy X5SA Pro
Articulated Butterfly
Articulated Butterfly
Articulated Pteradactyl
Articulated Pteradactyl
Finger Bones
Finger Bones for Halloween
Halloween ghosts
Printed a bunch of these halloween ghosts
Buck Converter Box
STL for a Simple box with a snap-fit lid for a HiLetGo DC to DC Buck Converter
Ender 6 SD Card Reader Mount
Mounting plate to replace the built in SD card reader with one that works with aftermarket motherboards
#Models (16 posts)
Palm Plant Pot
This is a great 4" pot for a small plant. It has a built-in water tray and a hole in the bottom for drainage.
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
Milwaukee Packout Labels
I have pulled together a few different resources for Milwaukee PACKOUT labels for different organizers.
Valentines Heart HueForge
My first attempt at printing a HueForge art piece. In this case, a three dimensional Valentines Heart
Small 'Metal' Drawers
Small drawers printed in metal silk filament
OMC/StepperOnline Stepper Motor Kit Data Sheets
Data sheets for OMC/StepperOnline VORON 2.4 Nema 17 Stepper Motor Kit 17HS19-2004S1
Sonos One Wall Mount
Wall mount for Sonos One speaker
Dinosaurs
Dinosaurs
Tronxy X5SA Pro Corner Pulley Covers
Corner pulley covers for Tronxy X5SA Pro
Articulated Butterfly
Articulated Butterfly
Articulated Pteradactyl
Articulated Pteradactyl
Finger Bones
Finger Bones for Halloween
Halloween ghosts
Printed a bunch of these halloween ghosts
Buck Converter Box
STL for a Simple box with a snap-fit lid for a HiLetGo DC to DC Buck Converter
Ender 6 SD Card Reader Mount
Mounting plate to replace the built in SD card reader with one that works with aftermarket motherboards
#Prints (16 posts)
Palm Plant Pot
This is a great 4" pot for a small plant. It has a built-in water tray and a hole in the bottom for drainage.
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
Milwaukee Packout Labels
I have pulled together a few different resources for Milwaukee PACKOUT labels for different organizers.
Valentines Heart HueForge
My first attempt at printing a HueForge art piece. In this case, a three dimensional Valentines Heart
Small 'Metal' Drawers
Small drawers printed in metal silk filament
OMC/StepperOnline Stepper Motor Kit Data Sheets
Data sheets for OMC/StepperOnline VORON 2.4 Nema 17 Stepper Motor Kit 17HS19-2004S1
Sonos One Wall Mount
Wall mount for Sonos One speaker
Dinosaurs
Dinosaurs
Tronxy X5SA Pro Corner Pulley Covers
Corner pulley covers for Tronxy X5SA Pro
Articulated Butterfly
Articulated Butterfly
Articulated Pteradactyl
Articulated Pteradactyl
Finger Bones
Finger Bones for Halloween
Halloween ghosts
Printed a bunch of these halloween ghosts
Buck Converter Box
STL for a Simple box with a snap-fit lid for a HiLetGo DC to DC Buck Converter
Ender 6 SD Card Reader Mount
Mounting plate to replace the built in SD card reader with one that works with aftermarket motherboards
#Ender 6 (11 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
OMC/StepperOnline Stepper Motor Kit Data Sheets
Data sheets for OMC/StepperOnline VORON 2.4 Nema 17 Stepper Motor Kit 17HS19-2004S1
Running klipper on an Ender 6
Here are my notes and steps for installing and running klipper on an Ender 6
Sonos One Wall Mount
Wall mount for Sonos One speaker
Dinosaurs
Dinosaurs
Ender 6 Extruder Relocation
Upgrading an Ender 6 with an BIQU H2 Direct Drive Extruder
Articulated Butterfly
Articulated Butterfly
Articulated Pteradactyl
Articulated Pteradactyl
Ender 6 Specs
Compilation of specs and data sheets for Ender 6 parts. Other references welcome.
Buck Converter Box
STL for a Simple box with a snap-fit lid for a HiLetGo DC to DC Buck Converter
Ender 6 SD Card Reader Mount
Mounting plate to replace the built in SD card reader with one that works with aftermarket motherboards
#Tronxy X5SA (7 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
OMC/StepperOnline Stepper Motor Kit Data Sheets
Data sheets for OMC/StepperOnline VORON 2.4 Nema 17 Stepper Motor Kit 17HS19-2004S1
Dinosaurs
Dinosaurs
Tronxy X5SA Pro Corner Pulley Covers
Corner pulley covers for Tronxy X5SA Pro
Finger Bones
Finger Bones for Halloween
Halloween ghosts
Printed a bunch of these halloween ghosts
Tronxy X5SA Pro Z Axis Sync
Automatically sync Z axis screws before a print on the Tronxy X5SA (Pro)
#Furniture (6 posts)
Maple Dresser
I built this Maple Dresser 20 years ago from raw maple but only took these pictures recently.
Shoe Storage Bench
We had wanted a better system for storing our shoes for a long time. When I saw this shoe storage bench, I realized it be perfect in our hallway.
Simple End Table in a Weekend
Here's a simple end table 2 feet high and measures 11" by 18". The wood cost around $10 from Home Depot and it only took a few hours to build.
Couch Arm Wrap
After buying a couch we missed the wooden arm rests on our old one, so I built some holders that wrap the arms and are perfect for setting drinks on.
Craftsman Coffee Table
This is a Craftsman style coffee table I built a few years back. It has survived very well and still the center of our living room. It is made from...
Walnut Hope Chest
I made this walnut and cherry hope chest a few years back. I used a plan from Wood Magazine. I think it came out pretty well and my wife absolutely...
#Outdoor Project (4 posts)
Doctor Who TARDIS Bird Feeder
At the request of an avid Doctor Who fan, I built a bird feeder in the form of a TARDIS. Instructions on how to build your own are included.
Garden Tool Storage Rack
I needed some way to hang up all our garden tools so came up with this not very fancy, but quite useful garden tool storage rack that I built out...
Cedar Garden Tote Plan
This garden tote was a great quick project that was made out of a couple of cedar fence pickets that I bought from Home Depot for $1.54 each.
Simple Bird Feeder
This is a very quick to make bird feeder made from only one single 5½" cedar fence board, so it only cost me around $2 and takes less than an hour...
#macOS (3 posts)
VSCode keeps asking for SSH key passphrase
How to stop VSCode from continually asking for SSH Key passphrase on macOS Ventura
QuickLook - MacOS
Tips for using QuickLook to preview files in MacOS
SSH access without passwords
Access your Raspberry Pi through SSH without needing a password
#Flexi Creatures (3 posts)
Dinosaurs
Dinosaurs
Articulated Butterfly
Articulated Butterfly
Articulated Pteradactyl
Articulated Pteradactyl
#Bambu X1C (2 posts)
Palm Plant Pot
This is a great 4" pot for a small plant. It has a built-in water tray and a hole in the bottom for drainage.
Small 'Metal' Drawers
Small drawers printed in metal silk filament
#web (2 posts)
Safely Decoding HTML Entities in React
Safely decode HTML entities such as &, <, and " in React without exposing your code to XSS vulnerabilities.
Sticky Headers that scroll with or without React
How to build a header that scrolls out of the way when the page is scrolled down and comes back when the page is scrolled up
#react (2 posts)
Safely Decoding HTML Entities in React
Safely decode HTML entities such as &, <, and " in React without exposing your code to XSS vulnerabilities.
Sticky Headers that scroll with or without React
How to build a header that scrolls out of the way when the page is scrolled down and comes back when the page is scrolled up
#typescript (2 posts)
Safely Decoding HTML Entities in React
Safely decode HTML entities such as &, <, and " in React without exposing your code to XSS vulnerabilities.
Sticky Headers that scroll with or without React
How to build a header that scrolls out of the way when the page is scrolled down and comes back when the page is scrolled up
#Bambu (2 posts)
Small 'Metal' Drawers
Small drawers printed in metal silk filament
Cardboard Spool Adapters for Bambu Lab's AMS
I have been compiling a list of adapters for the cardboard spools that most vendors seem to be using these days to work in the Bambu AMS. Here's the list.
#Unifi (2 posts)
Install PiHole on Unifi Dream Machine (UDM)
My steps to getting PiHole to block ads for all devices on my network using only my UDM (No Raspberry Pi needed)
Fixing Unifi AirPrint problems
Trying to find a solution to AirPrint printers keep disappearing on Unifi network
#Halloween (2 posts)
Finger Bones
Finger Bones for Halloween
Halloween ghosts
Printed a bunch of these halloween ghosts
#Octoprint (2 posts)
Safely connecting a Raspberry Pi to a 3D Printer
Safely connect a Raspberry Pi with Octoprint to a 3D Printer such as Creality Ender 4 or Cr-10 with a USB Power Blocker
Using a Wyze Camera with Octoprint
How to convert a Wyze Cam V2 into a webcam for streaming Octoprint or Klipper
#Gift (2 posts)
Doctor Who TARDIS Bird Feeder
At the request of an avid Doctor Who fan, I built a bird feeder in the form of a TARDIS. Instructions on how to build your own are included.
Bandsaw Vases
I made these a while back but was originally unable to post any pictures of them since they were a Christmas gift to my wife. By the time I gave...
#Plant Pot (1 posts)
Palm Plant Pot
This is a great 4" pot for a small plant. It has a built-in water tray and a hole in the bottom for drainage.
#Planter (1 posts)
Palm Plant Pot
This is a great 4" pot for a small plant. It has a built-in water tray and a hole in the bottom for drainage.
#Exit Button (1 posts)
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
#Bell Button (1 posts)
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
#Weatherproof (1 posts)
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
#Outdoor (1 posts)
Bell Button Holder
I needed a cover for an exit button that is installed on a post outside. I designed this cover to protect the button a little from the elements.
#Bambu Labs X1C (1 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
#Filament (1 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
#eSUN (1 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
#Overture (1 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
#PLA (1 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
#PETG (1 posts)
Filament list
I have been compiling a list of filaments that I have used along with data I have collected on them.
#Milwaukee (1 posts)
Milwaukee Packout Labels
I have pulled together a few different resources for Milwaukee PACKOUT labels for different organizers.
#Packout (1 posts)
Milwaukee Packout Labels
I have pulled together a few different resources for Milwaukee PACKOUT labels for different organizers.
#Labels (1 posts)
Milwaukee Packout Labels
I have pulled together a few different resources for Milwaukee PACKOUT labels for different organizers.
#HueForge (1 posts)
Valentines Heart HueForge
My first attempt at printing a HueForge art piece. In this case, a three dimensional Valentines Heart
#Valentines (1 posts)
Valentines Heart HueForge
My first attempt at printing a HueForge art piece. In this case, a three dimensional Valentines Heart
#Klipper (1 posts)
Running klipper on an Ender 6
Here are my notes and steps for installing and running klipper on an Ender 6
#VSCode (1 posts)
VSCode keeps asking for SSH key passphrase
How to stop VSCode from continually asking for SSH Key passphrase on macOS Ventura
#SSH (1 posts)
VSCode keeps asking for SSH key passphrase
How to stop VSCode from continually asking for SSH Key passphrase on macOS Ventura
#AirPrint (1 posts)
Fixing Unifi AirPrint problems
Trying to find a solution to AirPrint printers keep disappearing on Unifi network
#Network (1 posts)
Fixing Unifi AirPrint problems
Trying to find a solution to AirPrint printers keep disappearing on Unifi network
#Tronxy X5SA Pro (1 posts)
Tronxy X5SA Pro Corner Pulley Covers
Corner pulley covers for Tronxy X5SA Pro
#Extruder (1 posts)
Ender 6 Extruder Relocation
Upgrading an Ender 6 with an BIQU H2 Direct Drive Extruder
#Raspberry Pi (1 posts)
SSH access without passwords
Access your Raspberry Pi through SSH without needing a password